Indicator

 

 

Control

View-

 

 

panel

finder

Problem

Solution

Technical

(blinks)

(blinks)

(blinks)

(blinks) (blinks)

selected in remote control

Change shutter speed or se-

79,

mode and mode dial rotated

to S.

 

 

lect mode M.

82

 

 

 

 

• Flash required

for correct

• Raise built-in Speedlight.

97

exposure (P, S, A, M modes).

 

 

• Flash has fired at full power

• Check photo in monitor; if

114

( blinks

for three seconds

underexposed, adjust set-

 

after flash fires) .

 

tings and try again.

 

Speedlight

that

does not

Change flash mode setting on

 

support i-TTL flash control at-

186

tached and set to TTL.

optional Speedlight.

 

 

 

Memory insufficient to record

• Reduce quality or size.

41

further photos at current set-

tings, or camera has run out of

• Delete photographs.

124

file or folder numbers.

• Insert new memory card.

20

 

 

Troubleshooting—Notes

 

 

 

Release shutter. If error per-

 

 

 

Camera malfunction.

sists or appears frequently,

2

(blinks)

consult with Nikon-authorized

 

 

 

 

 

 

 

service representative.

 

 

Indicator

 

 

 

 

 

 

Control

 

 

 

 

 

Monitor panel

Problem

 

Solution

 

 

NO CARD

 

Camera cannot detect

Turn camera off and con-

 

 

 

firm that card is correctly

20

PRESENT

 

memory card.

 

inserted.

 

 

 

 

 

 

 

 

CARD IS NOT

 

Memory card has not been

Format memory card.

21

FORMATTED

 

formatted for use in D70S.

199