Using the Built-in Flash

The camera supports a variety of flash modes for photographing poorly lit or backlit sub- jects.

Using the Built-in Flash: , , , andModes

1Rotate the mode dial to select the desired mode.

2Press thebutton and rotate until the desired flash mode is displayed in the control panel ( 41).

3Take pictures. The flash will pop up as required when the shutter-release button is pressed halfway, and fire when a photograph is taken.

Using the Built-in Flash: P, S, A, and M Modes

1Rotate the mode dial to select the desired mode.

2Press thebutton to raise the flash.

3Press thebutton and rotate until the desired flash mode is displayed in the control panel (41).

4Select a metering method and set exposure.

5Take pictures. The flash will fire whenever a picture is taken.

Lowering the Built-in Flash

To save power when the flash is not in use, press it gently downward until the latch clicks into place.

40 Reference: More on Photography (All Modes) / Using the Built-in Flash