5Highlight Done and press OK.

Aicon will be displayed in the control panel. To exit without recording a multiple exposure, select Multiple exposure from the shooting menu, highlight Reset, and press OK.

6Frameblink. a photograph, focus, and shoot. The icon will start to

Cancelling a Multiple Exposure

To end shooting before the multiple exposure is complete, select Mul- tiple exposure from the shooting menu, highlight Cancel, and press OK. Shooting will also end if:

•The exposure meters turn off during shooting (18)

•The user performs a two-button reset

•The camera is turned off

•The battery is exhausted

•The multiple exposure is deleted

•A mode other than P, S, A, or M is selected

If shooting ends before the specified number of exposures have been taken, a multiple exposure will be created from the exposures that have been recorded to that point. If Auto gain is on, gain will be adjusted to reflect the number of exposures actually recorded.

7Take the remaining exposures. Theicon will disappear from the control panel when shooting is complete. Repeat steps 1 – 7 to

take additional multiple exposures.

Bracketing and Other Settings

Bracketing is cancelled when multiple exposure is selected and can not be restored until shooting has ended. While multiple exposure mode is in effect, memory cards can not be formatted and no shooting menu options can be changed, with the exceptions of Multiple exposure and White balance.

Menu Guide / Shooting Options: The Shooting Menu 85