116

Notes Technical

Problem

Cause/Solution

c

Transfer marking does

Pictures were marked for transfer

 

not appear

using another model of camera.

 

 

Select pictures for transfer using the

—

 

same model that initially took the

 

 

pictures.

 

PictureProject does not

• Camera is off.

10

start when camera is con-

• Batteries are exhausted.

16

nected

• USB cable is not correctly connected.

61

 

• Appropriate [USB] option is not

59, 60

 

selected.

 

 

• Camera is not registered in Device

—

 

Manager (Windows only).

 

 

See the PictureProject reference man-

 

 

ual (on CD) for further information.

 

 

• Computer is not set to launch Pic-

—

 

tureProject automatically.

 

 

 

 

Pictures not displayed on

Choose correct video mode.

58

television

Memory card contains no pictures.

14

 

Replace memory card. Remove mem-

 

 

ory card to play back pictures from

 

 

internal memory.

 

 

 

 

Pictures to be printed or

Memory card contains no pictures.

 

transferred are not dis-

Replace memory card. Remove mem-

—

played

ory card to print or transfer pictures

 

 

from internal memory.

 

 

 

 

Cannot select paper size

Paper size cannot be selected from

 

from camera

the camera if the printer does not

 

 

support the page sizes used by the

—

 

camera or the printer automatically

 

 

 

selects the page size. Use the printer

 

 

to select page size.

 

 

 

 

jElectronically Controlled Cameras

In extremely rare instances, unusual characters may appear in the monitor and the camera may stop functioning. In most cases, this phenomenon is caused by a strong external static charge. Turn the camera off, remove and replace the bat- teries, and then turn the camera on again. In the event of continued malfunction, contact your retailer or Nikon representative. Note that disconnecting the power source as described above may result in the loss of any data not recorded to internal memory or the memory card at the time the problem occurred. Data already recorded will not be affected.