Insert the Batteries
BReplacing BatteriesTurn the camera off and make sure that the
•Read and follow the warnings and cautions (Aiii, 98).
•Do not combine old and new batteries or batteries of different makes or types.
•Batteries with the following defects cannot be used:
Batteries with peeling | Batteries with insulation that | Batteries with a flat |
| does not cover the area | negative terminal |
| around the negative terminal. |
|
To improve battery performance, select the type of battery currently inserted in the camera in the setup menu. The default setting is the type of battery supplied with purchase. If your camera was purchased in Europe and alkaline batteries were supplied, change the setting to [Alkaline]. When any other type of battery is used, turn the camera on and change the setting (A93).
CAlkaline BatteriesPerformance of alkaline batteries may vary greatly depending on the manufacturer. Choose a reliable brand.
CAlternative Power ResourcesTo power the camera continuously for extended periods, use an
If no operations are performed for about five seconds, the monitor will dim to save power. Using any of the camera controls will reactivate the display. The monitor turns off if no operations are performed for thirty seconds (default setting). The camera enters standby mode.
After a further three minutes, the camera will turn off automatically (A88).
Steps First
13