C The Auto Off Function
•If you do not operate the camera for about 30 seconds, the monitor turns off, the camera enters standby mode, and the
•The amount of time until the camera enters standby mode can be changed using the Auto off setting (A24, E68) in the setup menu.
•While the camera is in standby mode, the monitor turns back on if you perform any of the following operations:
➝Press the power switch,
C Changing the Language Setting and the Date and Time Setting
•You can change these settings using the Language and Time zone and date settings in the zsetup menu (A24).
•You can enable or disable daylight saving time in the zsetup menu by selecting Time zone and date followed by Time zone. Press the multi selector Kand then Hto enable daylight saving time and move the clock forward one hour, or Ito disable daylight saving time and move the clock back one hour.
C The Clock Battery
•The camera’s clock is powered by a
•If the camera’s backup battery becomes exhausted, the date and time setting screen is displayed when the camera is turned on. Set the date and time again. See step 3 (A8) of “Turn the Camera On and Set the Display Language, Date, and Time” for more information.
Shooting for Preparing
11