Using Macro Mode
Use macro mode when taking
1Press the multi selector I(p).
2 Select ON and press the kbutton.
• If a setting is not applied by pressing the kbutton within a few seconds, the selection will be canceled.
Macro mode
3Move the zoom control to set the zoom ratio
to a position where Fand the zoom indicator glow green.
•When the zoom ratio is set to a position where Fand the zoom indicator glow green, the
camera can focus on subjects as close as approximately 30 cm (1 ft) from the lens.
When the zoom is at the position where Gis displayed, the camera can focus on subjects as close as approximately 10 cm (4 in.) from the lens.
B Notes About Using the Flash
The flash may be unable to light the entire subject at distances of less than 50 cm (1 ft 8 in.).
C The Macro Mode Setting
•The setting may not be available with some shooting modes (E17).
•The setting applied in A(auto) mode is saved in the camera’s memory even after the camera is turned off.
Section Reference
E15