Troubleshooting
If the camera fails to function as expected, check the list of common problems below before consulting your retailer or
|
| Problem | Cause/Solution | A |
|
|
| Wait for recording to end. |
|
|
|
| If the problem persists, turn the camera off. |
|
|
|
| If the camera does not turn off, remove and reinsert |
|
|
| The camera is on but does | the battery or batteries or, if you are using an AC | 6, 8, |
|
| not respond. | adapter, disconnect and reconnect the AC adapter. | E78 |
|
|
| Note that although any data currently being recorded will |
|
|
|
| be lost, data that have already been recorded will not be |
|
|
|
| affected by removing or disconnecting the power source. |
|
Technical |
|
|
|
|
| Camera turns off without | • The camera or batteries have become too cold and | F5 | |
|
|
| • The camera automatically turns off to save power | 11 |
|
|
| (auto off function). |
|
Notes |
| warning. | cannot operate properly. |
|
| • The inside of the camera has become hot. Leave | – | ||
|
| |||
|
|
| ||
and |
|
| the camera off until the inside of the camera has |
|
|
| cooled, and then try turning it on again. |
| |
|
|
|
| |
Index |
|
|
|
|
|
| • The batteries are exhausted. | 10 | |
|
|
| • The camera is off. | 8 |
|
|
| • The camera has entered standby mode to save power. | 1, 11 |
|
|
| Press the power switch, |
|
|
|
| button, cbutton, or |
|
|
| Monitor is blank. | • The flash lamp flashes while the flash is charging. | 2, E13 |
|
|
| Wait for the flash to charge. |
|
|
|
| • The camera and computer are connected via a USB | 26, 29 |
|
|
| cable. |
|
|
|
| • The camera and TV are connected via an audio/ | 26, E32 |
|
|
| video cable. |
|
|
|
|
|
|
F8