Nikon S6 Destination, Way out, Lens error, Representative, Tion From opening, Available, Did Not

Display	Problem				Solution
NEW CITY IS IN THE	Destination	in	same		No need to change time zones if desti-	85
CURRENT TIME ZONE	time zone as home.				nation is in same time zone as home.
INITIALIZING LENS					Wait until message has cleared from
CANNOT FOCUS	Camera cannot focus.				display and camera has zoomed all		—
					the way out.
					Turn camera off and then on again. If
LENS ERROR	Lens error.				error persists, contact retailer or Nikon	14
					representative.
	Finger or other obstruc-				Turn camera off and remove obstruc-
LENS COVER ERROR	tion prevents lens cover				tion.	2, 14
	from opening.
Profile not registered.	No wireless	profi les			Create profi le.	64–69
Set up profile.	available.
	USB cable disconnected				If PictureProject displays error, click OK	54–55,
	during transfer or print-				to exit. Resume after turning camera
	ing.				off and reconnecting cable.	58
COMMUNICATIONS ERROR
	USB option incorrect.				Choose correct USB option.	56
	PictureProject	did		not	See the PictureProject reference man-		—
	start.				ual (on CD) for more information.
					• Check that host computer or access		—
					point is on.
NETWORK CONNECTION	Unable to connect			to	• Check signal status and remove any	72
FAILED	wireless network.				obstacles between camera and host
					computer or access point.
					• Check network settings in Wireless	67
					Camera Setup Utility.
Failed to connect to	Unable to connect			to	• Check camera IP address settings in	67
(name of host)	selected host.				Wireless Camera Setup Utility.
					• Check fi rewall settings.	69
NO IMAGES ARE MARKED	No pictures selected for				Select pictures for transfer and try	81
FOR TRANSFER	transfer.				again.
					• Check battery level.	14
					• USB: Check that cable is connected.	54–55
TRANSFER ERROR	Transfer error.				• Wireless: Check signal status and re-	71–73
					move obstacles between camera
					and wireless adapter or access point.
Battery exhausted.	Battery exhausted dur-				Turn camera off and recharge battery,	11, 14,
Transfer terminated.	ing wireless transfer.				then turn camera on and select wire-	70
					less mode.
	Wireless transfer		inter-		Check signal status and remove any
Connection error.					obstacles between camera and wire-	71–73
	rupted.				less adapter or access point.
						95

Technical Notes