Nikon S6 Wireless Printing, Saving Pictures Directly to the Computer Shoot & Transfer, Pressing

Saving Pictures Directly to the Computer: Shoot & Transfer

Once a wireless connection has been established in Shoot & Transfer mode, the camera monitor will display the view through the lens. Pictures are transferred di- rectly to the computer as they are taken. The next picture can be taken when transfer is complete. The camera uses the last option selected for image mode; all other shooting menu settings are set to default values.

Pressing the	button in Shoot & Transfer mode displays the following op-
tions:
Item	Description
Confirm Transfer	Select On to display confi rmation message before picture is transferred.
	Select On to save copy of each picture to internal memory or camera mem-
Save Images	ory card. If Off is selected, pictures are saved to the computer only (	103;
	note that pictures may be lost if an error occurs during transfer).

Wireless Printing

If a printer profi le is selected from the profi le list ( 70), the camera will display the message“Connected to printer” followed by the wireless printing menu shown at right. Print pictures as described on pages 57–61. Note that pictures can not be printed if the printer is off.

The PD-10 Wireless Printer Adapter

The PD-10 wireless printer adapter (available separately) can be connected to any PictBridge-compatible printer with a type A (fl at) USB connector, allowing pictures to be printed without connecting the printer to a computer.

Wireless Printing Print selection Print all images DPOF printing Paper size

Confirm

Wireless Transfer and Printing

When printing pictures via the PD-10 for the fi rst time, choose wireless mode and display the profi le list as described in Steps 1–3 on page 70, then follow the steps below:

1. Connect the PD-10 to the printer and turn the printer on.

2. Press the START button on the PD-10.

3. Once the LINK lamp on the PD-10 has turned orange, press the camera button. The message “Connecting to wireless printer adapter” will be displayed. Set up profi les on the camera and PD-10 as described in the PD-10 instruction manual, starting from Step 3.

Once the profi le is stored in the camera, pictures can be printed by selecting the PD-10 in the profi le list ( 70). For more information, consult the instructions provided with the PD-10.

73