Wireless Transfer and Printing

4Confi rm that the computer is equipped for wire- less LAN and click Next. For more information, click Help.

Connect the COOL-STATION to the computer us-

 

 

5 ing the supplied USB cable and turn the camera

 

 

on. Click Next to proceed.

 

 

Windows: If the computer is not confi gured for

 

 

wireless LAN, uses fi xed IP addressing, or is run-

 

 

Varies with

ning Windows XP Service Pack 1, the dialog

setup type

shown in Step 7 will be displayed. Otherwise

 

 

proceed to Step 6.

 

 

Macintosh: Proceed to Step 7.

 

 

6If the computer uses more than one wireless LAN adapter or access point, choose the adapter or ac- cess point the camera will use from the pull-down menu, then choose the network type (the options available vary with the existing network confi gu-

ration):

Create an Infrastructure (Access Point) network profile: Connect to an existing infrastructure network.

Create an Ad-hoc (Camera to Computer) network profile (not available if the com- puter is already part of a wireless network or uses a fixed IP beginning with an address other than 169.254): Create a wireless network consisting only of the camera and the computer. Recommended for fi rst-time users of wire- less networks.

Create Infrastructure (Access Point) and Ad-hoc (Camera to Computer) network profiles: Connect to an ad-hoc network in one location and infrastructure networks in others.

Create Profile manually: Adjust settings manually.

Click Next to proceed to Step 7.

66

Page 76
Image 76
Nikon S6 manual On. Click Next to proceed, Ning Windows XP Service Pack 1, the dialog, Ration, Varies with, Setup type