Eye-Fi Upload

Press the dbutton Mzmenu icon MEye-Fi upload Mkbutton

Option

Description

bEnable

Upload images created by the camera to a preselected destination.

(default setting)

 

 

 

cDisable

Images are not uploaded.

B Notes About Eye-Fi Cards

•Note that images will not be uploaded if signal strength is insufficient even if Enable is selected.

•Remove your Eye-Fi card from the camera where wireless devices are prohibited. Signals may be transmitted even if Disable is selected.

•Refer to the instruction manual of your Eye-Fi card for more information. In the event of malfunction, contact the card manufacturer.

•The camera can be used to turn Eye-Fi cards on and off, but may not support other Eye-Fi functions.

•The camera is not compatible with the Endless Memory function. When it is set on a computer, disable the function. If the Endless Memory function is enabled, the number of images taken may not be displayed correctly.

•Eye-Fi cards are for use only in the country of purchase. Observe all local laws concerning wireless devices.

•Leaving the setting as Enable will result in the battery being depleted in a shorter period of time.

C Eye-Fi Communication Indicator

The communication status of the Eye-Fi card in the camera can be confirmed in the monitor (A7).

•w: Eye-Fi upload is set to Disable.

•x(lights): Eye-Fi upload enabled; waiting to begin upload.

•x(flashes): Eye-Fi upload enabled; uploading data.

•y: Eye-Fi upload enabled but no images available for upload.

•z: An error occurred. The camera cannot control the Eye-Fi card.

Section Reference

E87