|
| Problem | Cause/Solution | A |
|
|
| • The camera automatically turns off to save power | |
|
|
| (auto off function). |
|
|
|
| • The camera or battery have become too cold and | |
|
|
| cannot operate properly. |
|
|
| Camera turns off without | • The inside of the camera has become hot. Leave | – |
|
| warning. | the camera off until the inside of the camera has |
|
|
|
| cooled, and then try turning it on again. |
|
|
|
| • The camera turns off if the USB cable connecting it | |
|
|
| to a computer or printer is disconnected. | |
|
|
| Reconnect the USB cable. |
|
|
|
|
|
|
|
|
| • The camera is off. | |
|
|
| • The camera has entered standby mode to save | |
|
|
| power. Press the power switch, |
|
|
|
| button, Abutton, cbutton, or b(emovie- |
|
|
|
| record) button. |
|
|
| Monitor is blank. | • The flash lamp flashes while the flash is charging. | |
|
|
| Wait for the flash to charge. |
|
|
|
| • The camera and computer are connected via the | |
|
|
| USB cable. |
|
|
|
| • The camera and TV are connected via an audio/ | |
|
|
| video cable or HDMI cable. |
|
|
|
|
|
|
|
| Monitor is hard to read. | • Adjust the monitor brightness. | |
Technical |
| • The monitor is dirty. Clean the monitor. | ||
|
| |||
|
|
|
| |
|
| • If the camera clock has not been set, the “Date not |
| |
|
|
|
| |
|
|
| set” indicator flashes during shooting and movie |
|
Notes |
|
| recording. Images and movies saved before the |
|
|
| clock is set are dated “00/00/0000 00:00” or “01/01/ |
| |
|
|
|
| |
and |
| Date and time of recording | 2013 00:00” respectively. Set the correct time and | |
| date from the Time zone and date option in the | |||
| are not correct. | |||
|
| |||
Index |
| setup menu. | ||
|
|
| ||
|
| • The camera clock is not as accurate as ordinary |
| |
|
|
|
| |
|
|
| watches or clocks. Periodically compare the time of |
|
|
|
| the camera clock with that of a more accurate |
|
|
|
| timepiece and reset as required. |
|
|
|
|
|
|
|
|
|
|
|
F8