Troubleshooting
If the camera fails to function as expected, check the list of common problems below before consulting your retailer or
Problem |
| Cause/Solution | A |
|
|
| Wait for recording to end. |
|
|
| |
| If the problem persists, turn the camera off. |
|
|
| |
| If the camera does not turn off, remove and reinsert |
|
|
| |
The camera is on but does | the battery or batteries or, if you are using an AC |
|
|
| |
adapter, disconnect and reconnect the AC adapter. |
| ||||
not respond. |
| ||||
Note that although any data currently being recorded |
|
|
| ||
|
|
|
| ||
| will be lost, data that have already been recorded will |
|
|
| |
| not be affected by removing or disconnecting the |
|
|
| |
| power source. |
|
|
| |
|
|
|
|
|
|
| • | Confirm all connections. |
|
| |
| • When connected to a computer, the camera may |
|
|
| |
|
| not charge for any of the reasons described below. |
| ||
|
| - Off is selected for Charge by computer in the |
| ||
|
| setup menu. |
|
|
|
camera cannot be charged. |
| - Battery charging stops if the camera is turned off. | – | Technical | |
| been set, or the date and time were reset after |
| |||
|
| - Battery charging is not possible if the camera’s |
|
| |
Battery inserted in the |
| display language and date and time have not |
|
|
|
|
| the camera’s clock battery was exhausted. Use |
|
| Notes |
|
| the Charging AC Adapter to charge the battery. |
|
| |
|
|
|
|
| |
|
| - Battery charging may stop if the computer is in | – | and | |
|
| sleep mode. |
|
| |
|
| - Depending upon the computer specifications, | – | Index | |
|
| settings, and status, battery charging may not be |
|
| |
|
|
|
|
| |
|
| possible. |
|
|
|
Camera cannot be turned | The battery is exhausted. |
|
| ||
on. |
|
| |||
|
|
|
|
| |
|
|
|
|
|
|
F7