Problem | Cause/Solution | A |
| |
Cannot rotate image. | This camera cannot rotate images captured with | – | ||
another make or model of digital camera. | ||||
|
|
| ||
| • Video mode or HDMI is not correctly set in the TV | |||
| settings setup menu. |
|
| |
| • The cables are connected to the HDMI micro |
| ||
Images are not displayed on | connector (Type D) and to the USB/audio/video | |||
TV. | output connector simultaneously. | |||
| • The memory card contains no images. Replace the |
| ||
| memory card. Remove the memory card to play |
|
| |
| back images from the internal memory. |
|
| |
| • The camera is off. |
| ||
| • The battery is exhausted. |
| ||
| • The USB cable is not correctly connected. |
| ||
Nikon Transfer 2 does not | • The camera is not recognized by the computer. | – | ||
start when camera is | • Confirm system requirements. |
| ||
connected to a computer. | • The computer is not set to start Nikon Transfer 2 |
| ||
| automatically. For more information about |
|
| |
| Nikon Transfer 2, refer to help information |
|
| |
| contained in ViewNX 2. |
|
| |
|
|
|
| |
| With some |
|
| |
The PictBridge startup | PictBridge startup screen may not be displayed and it |
|
| |
screen is not displayed | may be impossible to print images when Auto is | |||
|
| |||
when the camera is | selected for the Charge by computer option in the |
| IndexandNotesTechnical | |
|
| |||
connected to a printer. | setup menu. Set the Charge by computer option to |
|
| |
| Off and reconnect the camera to the printer. |
|
| |
|
|
|
|
F15