Nikon S7 manual 137

Error Messages

Display	Problem	Solution	c
Cannot reduce blur.	Image cannot be	• Picture is considerably	55
	enhanced by vibration	blurred
	reduction.	• Shutter speed too slow
		• Picture was taken with
		a different camera,
		with Multi-shot 16, or
		with date imprint
		• Picture was taken imme-
		diately after the camera
		was turned on or reacti-
		vated from standby mode
This image has been	Image cannot be com-	Copies from small picture,	55
retouched. Cannot	pensated using vibration	crop, or vibration reduction
retouch to reduce	reduction.	option cannot be adjusted
blur.		using vibration reduction.
Communications	USB cable disconnected	If PictureProject displays	81, 86
error	during transfer or print-	error, click [OK] to exit.
E	ing.	Resume operation after
		turning camera off and
		reconnecting cable.
	[USB] option incorrect.	Choose correct [USB]	81, 82
		option.
	PictureProject did not start.	–	–
No images are	No pictures selected for	Select pictures for trans-	84,
marked for transfer	transfer.	fer in the playback menu	110
s		and try again.
Transfer error	Transfer error.	• Check battery level.	22
E		• Check that USB cable is	81
		connected.
System error	Error has occurred in	Turn camera off, remove	15, 22
u	camera’s internal cir-	and reinsert battery, and
	cuitry.	turn camera on. If error
		persists, contact retailer
		or Nikon representative.
Printer error	Running out of ink or	Check printer. After checking	–
check printer status	printer error.	the ink or solving the problem,
u		select [Resume] and press d
		to resume printing. (Depend-
		ing on the error, [Resume]
		may not be available.)

Technical Notes

137