Using the Flash

Basic Photography and Playback: Auto Mode

The flash has a range of 0.3–7.5 m (1 ft.–24 ft.) when the camera is zoomed out all the way. With maximum optical zoom applied, the range is 0.3–4 m (1 ft.–13 ft.). The following flash modes are available:

zAuto (default for L (auto) mode)

Flash fires automatically when lighting is poor.

AAuto with red-eye reduction Reduces “red-eye” in portraits (c 31).

BOff

Flash will not fire even when lighting is poor.

JFill flash

Flash fires whenever a picture is taken. Use to “fill-in” (illuminate) shadows and back-lit subjects.

DSlow sync

Flash illuminates main subject; slow shutter speeds are used to capture back- ground at night or under dim light.

1 Press J (flash mode).

The flash menu is displayed.

2 Use the rotary multi selector to choose the desired flash mode and press d.

The icon for the selected flash mode is displayed at the top of the monitor.

When [Monitor settings] (c 118) is set to [Auto info], the icon for the selected flash mode is only displayed for five seconds after the setting is applied. When set to [Show info], the z icon will only be displayed for five seconds after the setting is applied. All other icons will remain displayed.

The flash mode applied in L (auto) mode and high- sensitivity shooting mode is stored in the camera’s memory even after the camera is turned off.

If a setting is not applied by pressing d within five seconds, the selection will be cancelled.

z

Flash

Mz M

8

30

Page 42
Image 42
Nikon S7 manual Using the Flash, Press J flash mode, Flash menu is displayed