UPS/400 . . . an IBM AS/400 UPS power monitoring system . . .
•Recharge rate: Rate of recharge as defined in the System Setup screen. This value is expressed as the number of minutes recharging time required to yield one minute of usable UPS battery time
•Minutes remaining: Number of minutes remaining that the UPS can sustain the system during a power outage. This value will equal total battery life (above) when the UPS batteries are fully charged
PERCENTAGE OF UPS BATTERY LIFE REMAINING: This value is graphically indicated as a horizontal
The following is a description of logged UPS/400 activity:
•Elap: Elapsed number of minutes since FIRST power outage (i.e., since UPS was fully charged.)
•Act Time: Actual time of event
•Status: Status of event. TEST indicates event occurred during UPS/400 Test mode. ACTIVE indicates event has completed. Note that ACTIVE and DONE will not be reported in Test mode
•Description: Textual description of occurrence. An asterisk (*) indicates a group process that occurred as a scheduled event in the UPS/400 System Attributes screen
NOTE: You can now access a command line window from the current UPS Status Screen by pressing the F9 key and then Option 7. This will provide you with greater mobility within the system.
24
