Nikon UPS installation instructions First Installation — CD, First Installation — Tape, Upgrade

UPS/400 . . . an IBM AS/400 UPS power monitoring system . . .

INSTALLATION/REINSTALLATION INSTRUCTIONS

If you are installing UPS/400 for the first time or reinstalling, the instructions are the same. The program will install the product for you. If you are re-installing UPS/400, the installation program will create a library (UPSMBKU) where it will back up the library UPS400 before it begins installation. At the end of a successful installation, you can delete the library UPSMBKU. If you are using UPS/400 with multiple AS/400s in an APPN network environment, you must load a copy of UPS/400 on each machine that is to be monitored in the network.

Sign on as QSECOFR and load the distribution media or follow instructions below for internet download.

First Installation — CD

1.Load CD into the CD-ROM drive

2.Enter the following command: LODRUN DEV(*OPT)

3.The CD-ROM product installation menu is displayed. To install UPS/400, please enter a 1 beside UPS/400.

4.The product information will automatically be installed.

5.Use the command STRUPS400 to access the UPS/400 Main Menu.

First Installation — Tape

1.Load tape in the appropriate drive

2.At the command line type: RSTLIB SAVLIB(MBAINST) DEV(device name)

3.Execute the install command:

MBAINST/MBAINST PRODUCT(UPS) ACTION(*INSTALL) DEV(device name)

4.Use the command GO ICM to access the ICOM/400 Main Menu.

Upgrade

1.Back-up your current UPS/400 system (library UPS400).

2.Follow steps for the proper media format above.

3.NOTE: If you are upgrading to a new system, you will need to restore the old product library on the new system before proceeding with step 1.

4