Nikon user manual Preparing the WT-4, Attach the Antenna, Inserting the Battery

Preparing the WT-4

Preparing the WT-4

Attach the Antenna

Attach the supplied antenna to the WT-4 as shown in the diagram.

Inserting the Battery

To prevent loss of power during setup or upload, use a fully- charged battery or an optional AC adapter. The WT-4 takes one EN-EL3e rechargeable Li-ion battery; other batteries can not be used. Note that the drain on the battery is increased when the WT-4 is attached.

1 Open the battery chamber cover.

2 Using the side of the battery to	Battery latch
push the battery latch to one

side, slide the battery in until the latch clicks into place. Be sure the battery is in the

correct orientation. For safety precautions and information

on charging the battery, see the battery and charger manuals.

8Introduction