Nikon WT-4 user manual WPA2-PSK AES

9Enter the following information and click [Next].

•Network name (SSID): Enter a network name or choose from a list of existing networks. Do not change the name if it is supplied automatically.

•Communication mode: Select [Infrastructure].

•Authentication: Choose the authentication used on the network. In infrastructure mode, the camera supports WPA- PSK, WPA2-PSK, open system, and shared key authentication.

•Encryption: Choose the encryption used on the network. The options available depend on the authentication used:

Open: None, 64- or 128-bit WEP	Shared: 64- or 128-bit WEP
WPA-PSK: TKIP, AES	WPA2-PSK: AES

•Encryption key: If the network uses encryption, enter the network key. The number of characters required depends on the type of key used:

	WEP (64-bit)	WEP (128-bit)	TKIP, AES
Number of characters (ASCII)	5	13	8–63
Number of characters (hex)	10	26	64

•Key Index: If [WEP64] or [WEP128] is selected for [Encryption], choose a key index (the default index is [1]). A key index is not required when [None] is selected.

Copying Network Profiles to the Camera / Infrastructure Networks

Using the WT-4 with a Computer 65