Nikon WT-4 user manual Communication mode Select Ad hoc, WEP 64-bit

Copying Network Profiles to the Camera / Ad Hoc Networks

9Enter the following information and click [Next].

•Network name (SSID): Enter a network name or choose from a list of existing networks. Do not change the name if it is supplied automatically.

•Communication mode: Select [Ad hoc].

•Channel: Select a channel. Note that if a matching SSID is detected on a different channel, the WT-4 may change the channel automatically.

•Authentication: Choose the type of authentication used on the network. In ad-hoc mode, the camera supports open system and shared key authentication.

•Encryption: The type of encryption used on the network. Choose from [None] (open networks only), 64-bit WEP, and 128-bit WEP.

•Encryption key: If the network uses encryption, enter the network key. The number of characters required depends on the type of key used:

	WEP (64-bit)	WEP (128-bit)
Number of characters (ASCII)	5	13
Number of characters (hex)	10	26

•Key Index: If [WEP64] or [WEP128] is selected for [Encryption], choose a key index (the default index is [1]). A key index is not required when [None] is selected.

54Using the WT-4 with a Computer