are working together and are “in-phase”. Leave the speakers connected to the amplifier in this configuration. If the current sound is not richer in bass or louder than the previous sound, turn off the amplifier and reverse the connections of the wire you moved in step 3.

5.Check the phase between each speaker in the area by following the procedures for two-speaker stereo mode. Remembering to change the phase on both sides of the speaker when you perform step 4 of that procedure.

In two-speaker stereo mode or checking phase between speakers

1.Point the speakers at each other, rather than at the area you want to cover.

2.Play some music with the amplifier or receiver set to Mono.

3.Stand so you are the same distance from each speaker and listen to the richness of the bass and the loudness of the sound.

4.Turn off the amplifier and reverse the connections on one speaker only.

5.Repeat the listening test with the same setting of the volume controls. If the current sound has a richer bass and is slightly louder than the previous sound, the speakers are working together and are “in-phase”. Leave the speakers connected to the amplifier in this configuration. If the current sound is not richer in bass or louder than the previous sound, turn off the amplifier and reverse the connections of the wire you moved in step 4.

Verify System Operation and Loudspeaker Coverage

1.Turn the system “On” and play music to the speakers. Set the Volume controls to a level that allows the speakers to be easily heard over the “noise” in the area.

2.Verify that music is playing through each speaker. If not, trouble shoot the wiring and make sure each speaker is electrically connected to the amplifier.

3.Verify that each speaker is connected to the proper channel of the amplifier. To do this, change the balance of your speakers on your amplifier or receiver so that one channel is at playing loudly and the other is not. Verify that each speaker or each side of the speaker is attached to the proper channel of the amplifier. If they are not, correct the wiring on the loudspeaker that is not connected properly. Reset the balance on the amplifier or receiver so both channels have a similar volume level.

4.If you used a volume control between the amplifier and the speakers, verify that it is controlling the volume of the loudspeakers in its zone. Repeat this for every volume control in the system. If it is not, correct the wiring.

5.Point the loudspeakers per the layout and verify that the sound is even and consistent throughout the area.

INSTALLATION

14

Page 14 Page 16
Page 15
Image 15
Niles Audio RS8Si Sandstone, RS8Si Granite manual Two-speaker stereo mode or checking phase between speakers
Page 14 Page 16

RS8Si Sandstone, RS8Si Granite specifications

The Niles Audio RS8Si series, consisting of the RS8Si Sandstone and RS8Si Granite models, represents a remarkable innovation in outdoor audio technology. Designed to deliver exceptional sound quality while blending seamlessly into natural landscapes, these speakers are ideal for patios, gardens, and poolside areas.

One of the defining features of the RS8Si offerings is their rugged design. Both models are constructed with high-quality materials that are resistant to harsh weather conditions, including rain, snow, and intense sunlight. Their UV-resistant finishes ensure that they maintain their aesthetic appeal over time, regardless of environmental exposure. The sandstone and granite finishes allow these speakers to camouflage into their surroundings, providing a discreet audio solution without compromising on sound performance.

The RS8Si speakers utilize advanced audio technology to deliver a rich and immersive listening experience. Each speaker is engineered with a robust 8-inch polypropylene woofer, which provides deep bass and clear mid-range frequencies. Complementing this is a 1-inch aluminum dome tweeter that ensures crisp high frequencies, resulting in a balanced audio spectrum that is well-suited for various music genres and outdoor entertainment.

An additional feature of the RS8Si series is their wide sound dispersion. The speakers are designed to deliver 180-degree sound coverage, allowing owners to enjoy consistent audio throughout larger outdoor spaces. This feature is particularly beneficial for social gatherings, where multiple listeners can enjoy a unified audio experience from different vantage points.

Installation and connectivity are made simple with the RS8Si models. They come equipped with integrated mounting points that ensure secure placement in various outdoor locations, alongside the option for ground or wall mounting. Featuring easy-to-use connections, these speakers support a straightforward setup with a variety of audio systems.

Another noteworthy technology is the speaker’s weather-resistant design, including an all-weather seal that protects the internal components from moisture and debris. This durability, combined with high-quality sound performance, places the Niles Audio RS8Si speakers as a leading choice for outdoor audio applications.

In summary, the Niles Audio RS8Si Sandstone and RS8Si Granite speakers offer a sophisticated blend of durability, aesthetics, and audio excellence. They are designed to withstand the elements while delivering a rich and immersive sound experience, making them perfect for outdoor enjoyment. Whether you’re hosting a summer party or relaxing in solitude, the RS8Si series elevates your audio experience outdoors.
Top Page Image Contents