3 Touchaor bto select the speaker to
beadjusted.
Eachtime you touch aor bselects the speak-
erin the following order:
FRONT(front speakers)CENTER (center
speaker)REAR(rear speakers)
SUBWOOFER (subwoofer)PHASE (subwoo-
fersetting)
#Youcan switch to PHASE only when the sub-
wooferhas been set to ON.
4 Touchcor dto select the correct size
forthe selected speaker.
Eachtime you touch cor dselects the size in
thefollowing order:
OFF(off)SMALL (small)LARGE (large)
#Youcannot select OFF, when FRONT (front
speakers)have been selected.
#Youcan select ON or OFF, when
SUBWOOFER (subwoofer) has been selected.
#Youcan switch REVERSE (reverse phase) or
NORMAL(normal phase), when PHASE (subwoo-
fersetting) has been selected.

Correctingthe subwoofers phase

Iftr ying to boost the bass output of the sub-
wooferdoesnt do much or rather makes you
feelthat the bass gets more murky, this may
indicatethat the subwoofer s output and bass
contentyou hear over other speakers cancel
eachother out. To remove this problem, try
changingthe phase setting for the subwoofer.
1 TouchNEXT on the DSP function menu.
2 TouchSP SET.
3 Touchaor bto select SUB WOOFER
(subwoofer).
Eachtime you touch aor bselects the speak-
erin the following order:
FRONT(front speakers)CENTER (center
speaker)REAR(rear speakers)
SUBWOOFER (subwoofer)PHASE (subwoo-
fersetting)
4 Touchcto turn subwoofer output on.
#Toturn subwoofer output off, touch d.
5 Touchband then touch cor dto se-
lectthe phase of subwoofer output.
Touchdto select normal phase and
NORMALappears in the display. Touch cto
selectreverse phase and REVERSE appears in
thedisplay.
Note
Whenplaying a 2-channel mono source with Pro
Logicturned on, there may be occasions when
thefollowing will occur:
!Noaudio is outputted if the center speaker
settingis SMALL or LARGE and no center
speakeris installed.
!Audiois heard only over the center speaker if
installedand the center speaker setting is
SMALLor LARGE.
Selecting a cross-over frequency
Youcan select a frequency, under which
soundsare reproduced through the subwoo-
fer.If the installed speakers include one whose
sizehas been set to SMALL, you can select a
frequency,under which sounds are repro-
ducedthrough a LARGE speaker or subwoo-
fer.
1 TouchNEXT on the DSP function menu.
2 TouchCROSS OVER.
3 Touchaor bto select the speaker to
beadjusted.
Eachtime you touch aor bselects the speak-
erin the following order:
Available accessories
En 63
Section
04
Availableaccessories