Operating this unit

2Touch ato turn the set back on and the LCD panel slides to the back.

# Touch bto turn the set back off and the LCD panel slides to the front.

3Touch cor dto select the display to open/close automatically or manually. Touch cto select MANUAL, and you have to press OPEN/CLOSE to open/close the display. Touch dto select AUTO, and the display auto- matically opens/closes when power to this unit is turned on.

Setting the clock

Use these instructions to set the clock.

1Touch CLOCK ADJUST on the setup menu.

2Touch OFF to turn the clock display on. ON will appear in the display instead of OFF. Clock display is now on.

# To turn the clock display off, touch ON.

3Touch cor dto select the segment of the clock display you wish to set.

Each time you touch cor dit will select one segment of the clock display:

Hour—Minute

As you select segments of the clock display the segment selected will be highlighted.

4Touch aor bto put a clock right. Each time you touch ait increases the se- lected hour or minute. Each time you touch b it decreases the selected hour or minute.

Section

03

Notes

 

! You can match the clock to a time signal by

Operating

— If the minute is 30 to 59, the minutes are

touching JUST.

 

— If the minute is 00 to 29, the minutes are

 

rounded down. (e.g., 10:18 becomes

 

10:00.)

this

! Even when the sources are off, the clock dis-

rounded up. (e.g., 10:36 becomes 11:00.)

unit

play appears on the display.

 

Using the AUX source

An IP-BUS-RCA Interconnector such as the CD-RB20/CD-RB10 (sold separately) lets you connect this unit to auxiliary equipment fea- turing RCA output. For more details, refer to the IP-BUS-RCA Interconnector owner’s man- ual.

Selecting AUX as the source

%Touch the source icon and then touch AUX to select AUX as the source.

# When the source icon is not displayed, you can display it by touching the screen.

# If the auxiliary setting is not turned on, AUX cannot be selected. For more details, see Switch- ing the auxiliary setting on page 43.

Setting the AUX title

The title displayed for the AUX source can be changed.

1After you have selected AUX as the source, press A.MENU button and touch FUNCTION and then touch NAME EDIT.

2Touch ABC to select the desired charac- ter type.

Touch ABC repeatedly to switch between the following character types:

En 47

Page 47
Image 47
Pioneer AVH-P4950DVD Setting the clock, Using the AUX source, Selecting AUX as the source, Setting the AUX title