Using the position selector
Oneway to assure a more natural sound is to
accuratelyposition the stereo image, putting
youright in the center of the sound field.The
positionselector function letsyou automati-
callyadjust the speaker output levels and in-
sertsa delay time to match the number and
positionof occupied seats. When used in con-
junctionwith the SFC, the feature will make
thesound image more natural and offer a pa-
noramicsound that envelops you.
1 TouchPOSITION on the DSP function
menu.
2 Touchc/d/a/bto select a listening po-
sition.
Touchone of these, c/d/a/b, to select a lis-
teningposition as listed in the table.
Key Display Position
cFRONT-L Frontseat left
dFRONT-R Frontseat right
aFRONT Frontseats
bALL Allseats
#Tocancel the selected listening position,
touchthe same key again.
Note
Whenyou make adjustments to the listening po-
sition,the speaker outputs are automatically set
forappropriate levels. You can tailor the levels
moreprecisely referring to Adjusting the speaker
outputlevels using a test tone or Adjusting the
speakeroutput levels.
Using balance adjustment
Youcan change the fader/balance setting so
thatit can provide you an ideal listening envir-
onmentin all occupied seats.
1 TouchFAD/BAL on the DSP function
menu.
2 Touchaor bto adjust front/rear
speakerbalance.
Eachtime you touch aor bit moves the
front/rearspeaker balance towards the front or
therear.
FRONT:25to REAR:25 is displayed as the
front/rearspeaker balance moves from front to
rear.
#FR:00is the proper setting when only two
speakersare used.
3 Touchcor dto adjust left/right speak-
erbalance.
Eachtime you touch cor dit moves the left/
rightspeaker balance towards the left or the
right.
LEFT:25to RIGHT:25 is displayed as the left/
rightspeaker balance moves from left to right.
Adjusting source levels
SLA(source level adjustment) lets you adjust
thevolume level of each source to prevent ra-
dicalchanges in volume when switching be-
tweensources.
!Settingsare based on the FM volume level,
whichremains unchanged.
1 Comparethe FM volume level with the
levelof the source you wish to adjust.
2 TouchSLA on the DSP function menu.
3 Pressaor bto adjust the source vo-
lume.
Eachtime you press aor bit increases or de-
creasesthe source volume.
+4to –4is displayed as the source volume is
increasedor decreased.
Available accessories
En
60
Section
04