Tuner
Basic Operations
1
2
4
3
6
7
5
1Sourceicon
2Bandindicator
3Presetnumber indicator
4Frequencyindicator
5Presetlist display
6LOCALindicator
Showswhen local seek tuning is on.
7STEREOindicator
Showswhen the selected frequency is being
broadcastin stereo.
1 Touchthe source icon and then touch
TUNERto select the tuner.
2 Touchthe screen to display the touch
panelkeys.
3 TouchBAND to select a band.
TouchBAND until the desired band (FM1,
FM2,FM3for FM or AM) is displayed.
4 Toselect a preset channel, touch a pre-
setchannel on the list.
Thepreset channel you selected is tuned in.
#Whenthe list of channels is not displayed,
touchLIST.
5 Toperform manual tuning, briefly
touchcor d.
Thefrequencies move up or down step by
step.
6 Toperform seek tuning, keep touching
cordfor about one second and release.
Thetuner will scan the frequencies untila
broadcaststrong enough for good reception is
found.
#Youcan cancel seek tuning by briefly touching
eithercor d.
#Ifyou keep touching cor dyou can skip sta-
tions.Seek tuning starts as soon as you release
thekey.
Note
Ifyou do not use the touch panel keys within 30
seconds,they will be hidden automatically.

Storing and recallingbroadcast

frequencies

Youcan easily store up to six broadcast fre-
quenciesfor later recall.
!Upto 18 FM stations, six for each ofthe
threeFM bands, and six AM stations can
bestored in memory.
%Whenyou find a frequency that you
wantto store in memory keep touching
oneof preset tuning keys P1 to P6 until the
presetnumber stops flashing.
Thenumber you have touched willflash in the
presetnumber indicator and then remain lit.
Theselected radio station frequency has been
storedin memory.
Thenext time you touch the same preset tun-
ingkey the radio station frequency is recalled
frommemory.
#Whenthe touch panel keys are not displayed,
youcan display them by touching the screen.
Operating this unit
En 21
Section
03
Operatingthis unit