Available accessories

4Touch cor dto adjust the speaker out- put level.

Each time you touch cor dincreases or de- creases the speaker output level. +10 to –10 is displayed as the level is increased or de- creased.

# The test tone rotates to the next speaker after about two seconds from the last operation.

5Touch STOP to stop the test tone out- put.

Notes

!You can also display the speaker output level menu by pressing BOOST button.

!If needed, select speakers and adjust their ‘ab- solute’ output levels. (Refer to Adjusting the speaker output levels on the previous page.)

!To adjust the speaker output levels in this mode is the same as making the speaker out- put levels at SP LEVEL. Both provide the same results.

Using the time alignment

The time alignment lets you adjust the dis- tance between each speaker and the listening position.

1Touch NEXT on the DSP function menu.

2Touch TIME ALIGN.

3Touch any of the following touch panel keys to select the time alignment.

!INIT – Initial time alignment (factory set- ting)

!AUTOTA – Time alignment created by auto TA and EQ. (Refer to Auto TA and EQ (auto- time alignment and auto-equalizing) on page 67.)

!CUSTOM – Adjusted time alignment that you can create for yourself

Section

04

! OFF – Turn the time alignment off

 

! ADJUST – Adjust the time alignment as de-

 

sired

 

# You cannot select AUTOTA if auto TA and EQ

 

has not been carried out.

Available

# You cannot select ADJUST when neither

 

FRONT-L nor FRONT-R is selected in POSITION.

 

Adjusting the time alignment

accessories

You can adjust the distance between each

 

speaker and the selected position.

 

! An adjusted time alignment is memorized

 

in CUSTOM.

 

1Touch NEXT on the DSP function menu.

2Touch TIME ALIGN and then touch

ADJUST.

# You cannot select ADJUST when neither FRONT-L nor FRONT-R is selected in POSITION.

3Touch aor bto select the speaker to be adjusted.

Each time you touch aor bselects the speak- er in the following order:

FRONT-L (front speaker left)—CENTER (center speaker)—FRONT-R (front speaker right)— REAR-R (rear speaker right)—REAR-L (rear speaker left)—SUB WOOFER (subwoofer)

# You cannot select speakers whose size is set at OFF.

4Touch cor dto adjust the distance be- tween the selected speaker and the listen- ing position.

Each time you touch cor dincreases or de- creases the distance. 0.0 to 500 cm is dis- played as the distance is increased or decreased.

5Touch ESC to return to the playback dis- play.

En 65

Page 65
Image 65
Pioneer AVH-P4950DVD operation manual Using the time alignment, Adjusting the time alignment