Pioneer AVH-P4950DVD Operating this unit Initial Settings, Adjusting initial settings

Section

03 Operating this unit

Initial Settings

Adjusting initial settings

Important

Following function cannot be operated in your area. (Inoperable function is indicated in grays- cale.)

—V.D.P. MIX

Using the initial settings, you can customize various system settings to achieve optimal per- formance from this unit.

1

1Function display

Shows the function names.

1Touch the source icon and then touch OFF to turn this unit off.

#When the source icon is not displayed, you can display it by touching the screen.

2Press A.MENU button and touch INIT to display the initial function names.

The function names are displayed and oper- able ones are highlighted.

#To go to the next group of function names, touch NEXT.

#To return to the previous group of function names, touch PREV.

#When the multi-channel processor (e.g., DEQ- P7650) is connected to this unit, you can operate D. ATT and RESET instead of REARSP.

#To return to the previous display, touch BACK.

#To return to the display of each source, touch ESC.

Setting the FM tuning step

The FM tuning step employed by seek tuning can be switched between 100 kHz, the preset step, and 50 kHz.

%Touch FMSTEP on the initial menu to se- lect the FM tuning step.

Touching FMSTEP will switch the FM tuning step between 50 kHz and 100 kHz while AF or TA is on. The selected FM tuning step will ap- pear in the display.

Note

If seek tuning is performed in 50 kHz steps, sta- tions may be tuned in imprecisely. Tune in the sta- tions with manual tuning or use seek tuning again.

Setting the AM tuning step

The AM tuning step can be switched between 9 kHz, the preset step, and 10 kHz. When using the tuner in North, Central or South America, reset the tuning step from 9 kHz (531 kHz to 1 602 kHz allowable) to 10 kHz (530 kHz to 1 640 kHz allowable).

%Touch AMSTEP on the initial menu to select the AM tuning step.

Touching AMSTEP will switch the AM tuning step between 9 kHz and 10 kHz. The selected AM tuning step will appear in the display.

Switching the warning tone

If the front panel is not detached from the head unit within five seconds of turning off the ignition, a warning tone will sound. You can turn off the warning tone.

42 En