APPENDIX 4 SYSTEM MODE

EO1-33029

A4.6 PCL Emulation Setting

A4.6 PCL Emulation Setting (Cont.)

NOTE:

Cut issue is available only when the optional cutter module (B-7208-QM) is installed. When you need the cutter, please contact your nearest TOSHIBA TEC service representative.

NOTE:

If holding the [RESTART] or [FEED] key for 0.5 seconds or longer in the parameter

setting, the key is entered

continuously.

Issue Mode Selection

With this parameter select the Issue Mode for the PCL Emulation.

7<3(>6@12￿&87￿

 

 

 

Batch mode with

[RESTART]

7<3(>6@12￿&87￿

 

 

no cut.

[FEED]

Cut mode.

7<3(>&@:,7+￿&87￿

After selecting the issue mode, press the [PAUSE] key to show the Media Size Selection menu.

Media Size Selection

With this parameter select the Media Size for the PCL Emulation.

0(',$￿￿￿￿￿$￿￿

0(',$￿￿￿￿￿$￿￿

A4 Size

[RESTART]

Customize

0(',$￿￿￿￿86(5￿

0(',$￿￿￿/(77(5￿

Letter Size

[FEED]

Legal Size

0(',$￿￿￿/(*$/￿

After selecting the media size, press the [PAUSE] key.

When “A4”, “LEGAL”, or “LETTER” is selected, the display returns to

"<8>PCL EMULATION".

When “USER” is selected, the Media Width Setting menu is displayed.

Media Width Setting

>:@￿￿￿￿￿>/@￿￿￿￿￿

[RESTART]

[FEED] >:@￿￿￿￿￿>/@￿￿￿￿￿

Media width (Unit: 0.1mm)

[FEED] key: Pressing the [FEED] key one time causes a –1 change, up to 100.

[RESTART]key: Pressing the [RESTART] key one time causes a +1 change, up to 2168.

After selecting the media width, press the [PAUSE] key to show the Media Length Setting menu.

A4-21

Page 99
Image 99
Toshiba B-852-TS12-QQ owner manual Issue Mode Selection, Media Size Selection, Media Width Setting