Toshiba B-852-TS12-QQ owner manual Emulation ON/OFF Selection, Print Speed, Sensor Type Selection

APPENDIX 4 SYSTEM MODE

EO1-33029

A4.6 PCL Emulation Setting

A4.6 PCL Emulation Setting (Cont.)

NOTE:

Select the appropriate sensor type to match the media being used. Basically, the Reflective Sensor (Black Mark Sensor) is for tag paper, and the Transmissive Sensor (Feed Gap Sensor) is for label..

NOTE:

Select the appropriate Print Mode which matches the media being used. Basically, Thermal Transfer is for the use of ribbon, and Thermal Direct is for the use of thermal media.

Emulation ON/OFF Selection

(08/$7,21￿￿2))￿
(08/$7,21￿￿2))￿	PCL Emulation is not
[RESTART]	available.
[FEED]	PCL Emulation is
(08/$7,21￿￿21￿
	available.

When “EMULATION OFF” is selected, press the [PAUSE] key to return to “<8>PCL EMULATION”.

When “EMULATION ON” is selected, press the [PAUSE] key to proceed to the detailed setting menus.

Print Speed

With this parameter select the print speed for the PCL Emulation.

35,17￿63(('￿￿´￿V￿

[RESTART] 35,17￿63(('￿￿´￿V￿

[FEED] 35,17￿63(('￿￿´￿V￿

After selecting the print speed, press the [PAUSE] key to show the Sensor Type Selection menu.

Sensor Type Selection

With this parameter select the sensor type used for the PCL Emulation.

6(1625￿75$16￿￿
[RESTART]	6(1625￿121(￿	No sensor
		Black mark sensor
[FEED]	6(1625￿5()/(&7￿￿
		(Lower)
	6(1625￿75$16￿￿	Feed gap sensor

After selecting the sensor type, press the [PAUSE] key to show the Printing Method Selection menu.

Printing Mode Selection

With this parameter select the printing method for the PCL Emulation.

357￿7<3(￿75$16)(5￿

[RESTART]	357￿7<3(￿75$16)5￿	Thermal transfer
[FEED]	357￿7<3(￿',5(&7￿	Thermal direct

After selecting the printing mode, press the [PAUSE] key to show the Issue Mode Selection menu.

A4-20