APPENDIX 1 SPECIFICATIONS

EO1-33029

A1.4 Ribbon

A1.4 Ribbon

Please make sure that the ribbon being used is approved by TOSHIBA TEC. The warranty does not apply to any problem caused by using non-approved ribbons.

For information regarding TOSHIBA TEC approved ribbon, please contact a sales representative.

Type

Spool type

Width

120 – 220 mm

 

Recommended width is 120, 160 and 220 mm.

Length

300 m

Outside Diameter

φ72 mm (max.)

The table below shows the correlation between ribbon width and media width (backing paper is not included).

Ribbon width

Media width

120 mm

70 – 110 mm

160 mm

110 – 150 mm

220 mm

150 – 242 mm

NOTES:

1.To ensure print quality and print head life use only TOSHIBA TEC specified ribbons.

2.Use of media with a rough surface may cause ribbon smudges when using ribbon save issue.

3.To avoid ribbon wrinkles use a ribbon which is wider than the media by 10 mm or more. However, too much difference in width between the two may cause wrinkles.

4.Be sure to use 220 mm-wide ribbon when using media that is 210 to 242 mm wide.

A1- 5

Page 75
Image 75
Toshiba B-852-TS12-QQ owner manual A1.4 Ribbon