Toshiba B-852-TS12-QQ Print Speed Setting, Sensor Type Selection, Printing Mode Selection

APPENDIX 4 SYSTEM MODE

EO1-33029

A4.5 Test Print

A4.5 Test Print (Cont.)	Print Speed Setting
	Select the print speed for the test print from 4 inches/second and 2
	inches/second.

35,17￿63(('￿￿´￿V￿

[RESTART] 35,17￿63(('￿￿´￿V￿

[FEED] 35,17￿63(('￿￿´￿V￿

NOTE:

Select the sensor type which applies to the media being used. Basically, the Reflective Sensor (Black Mark Sensor) is for tag paper, and the Transmissive Sensor (Feed Gap Sensor) is for label.

After selecting the print speed, press the [PAUSE] key to go to Sensor Type Selection.

Sensor Type Selection

Select the sensor type among “TRANS” (Feed Gap Sensor), “REFLECT” (Black Mark Sensor) and “NONE”.

6(1625￿75$16￿￿

6(1625￿121(￿	None
[RESTART]	Black Mark Sensor
6(1625￿5()/(&7￿￿
[FEED]	Feed Gap Sensor
6(1625￿75$16￿￿

After selecting the sensor type, press the [PAUSE] key to go to Printing Mode Selection.

NOTE:

Select the printing mode which applies to the desired operating conditions.

Basically, the Thermal Transfer is for the use of ribbon, and the Thermal Direct is for the use of thermal paper.

Printing Mode Selection

Select the printing mode for the test print between “TRANSFR” (Thermal transfer) and “DIRECT” (Thermal direct).

357￿7<3(￿75$16)5￿

[RESTART]	357￿7<3(￿75$16)5￿	Thermal Transfer
[FEED]	357￿7<3(￿',5(&7￿	Thermal Direct

After selecting the printing mode, press the [PAUSE] key to go to Issue Mode Selection.

A4-15