APPENDIX 4 SYSTEM MODE
A4.5 Test Print
A4.5 Test Print (Cont.)
NOTES:
∙ When pressing the [FEED] |
and [RESTART] keys at |
the same time in the Test |
Print menu, the message |
returns to “<4>TEST |
PRINT”. |
∙ If holding the [FEED] or |
[RESTART] key for 0.5 |
seconds or longer in the |
Test Print menu, the key is |
entered continuously. |
∙ The fine adjustment |
parameters are effective for |
the Test Print. (except for X |
Axis Fine Adjustment.) |
∙ If any error occurs, an |
error message appears, and |
the printer stops printing. |
After clearing the errors, |
press the [PAUSE] key to |
return to the System Mode |
While pressing the [FEED] and [PAUSE] keys at the same time, turn on the printer. Hold both keys until the “<1>DIAG. Vx.x” Message appears.
!',$*9[[
Press the [FEED] key 2 times.
The Test Print is ready to be performed.
!7(6735,17
Specifying the Print Condition for the Test Print
The print conditions for the Test Print should be specified before printing. When “<4>TEST PRINT” appears, press the [PAUSE] key.
35,17&21',7,21
Issue Count Setting
To enter the Issue Count Setting menu, press the [PAUSE] key.
,668(&2817
menu. The printer does not |
resume printing |
automatically. |
∙ A changed parameter |
becomes enabled by |
pressing the [PAUSE] key |
and is stored in memory |
until the printer is turned |
off. |
[RESTART]
,668(&2817
,668(&2817
,668(&2817
,668(&2817
,668(&2817
,668(&2817
[FEED] ,668(&2817
,668(&2817
,668(&2817
After selecting the issue count, press the [PAUSE] key to go to Print Speed Setting.
