A-2 / ENGLISH
TABLE OF CONTENTS
| page |
Introduction | |
Cautions and Warnings | |
Consignes de prudence et de sécurité | |
Know Your Machine | |
Control Panel | |
Prepare the Machine for Use |
|
Install the Batteries | |
Install the Brushes | |
Install the Squeegee | |
Fill the Solution Tank | |
Detergent (AXP™/EDS™) System | |
Operating the Machine | |
Scrubbing | |
Wet Vacuuming | |
After Use | |
Maintenance Schedule | |
Lubricating the Machine | |
Charging the Batteries | |
Check the Battery Electrolyte Level | |
Squeegee Maintenance | |
Squeegee Adjustment | |
Side Skirt Maintenance | |
Troubleshooting | |
Technical Specifications |
INTRODUCTION
This manual will help you get the most from your
Note: Bold numbers in parentheses indicate an item illustrated on pages
This product is intended for commercial use only.
PARTS AND SERVICE
Repairs, when required, should be performed by your Authorized
Call the
(Dealer, affix service sticker here.)
NAME PLATE
The Model Number and Serial Number of your machine are shown on the Nameplate on the machine. This information is needed when ordering repair parts for the machine. Use the space below to note the Model Number and Serial Number of your machine for future reference.
MODEL NUMBER ______________________________________________________
SERIAL NUMBER ______________________________________________________
UNCRATE THE MACHINE
When the machine is delivered, carefully inspect the shipping carton and the machine for damage. If damage is evident, save the shipping carton so that it can be inspected. Contact the
After removing the carton, cut the plastic straps and remove the wooden blocks next to the wheels. Use a ramp to roll the machine from the pallet to the floor.