Nilfisk-Advance America IVB 5-M manual 7.1Maintenance plan, As required, IVB 3-M/5-M, IVB 7-M

IVB 3-M IVB 5-M IVB 7-M

english

7 Maintenance

7.1Maintenance plan

		After finishing work	As required
7.2.1	Replacing the waste bag		
7.2.2	Replacing the filter bag		
7.2.3	Emptying dirt tank (IVB 3-M/5-M)	
7.2.4	Emptying the dirt tank (IVB 7-M)	
7.2.5	Replacing filter element		
	(IVB 3-M)
7.2.6	Replacing filter element		
	(IVB 5-M/7-M)

7.2Maintenance work 7.2.1 Replacing the waste

bag

When using IVB 3-M/5-M/7-M clean them thoroughly before replacing the waste bag - see sections 4.5 bzw.4.6.

During the following work, ensu- re that dust is not unnecessarily spread around. Wear a P2 brea- thing mask.

1

2

3

IVB 3-M/5-M:

1.Open the retaining clamps and remove the upper section of the cleaner from the dirt tank.

2.Carefully remove the waste bag connection (1) from the inlet fit- ting.

3.Close the waste bag connection with the slide (2).

4.Close the waste bag using the cable binder (3).

5.Dispose of the dirt in accordance with legal regulations.

6.Insert a new filter bag into the cleaned tank as described in the instructions enclosed.

IMPORTANT: Press the filter bag connection firmly on to the inlet fitting.

		IVB 7-M:
	2	1.	Remove the upper section of
		2.	cleaner from the dirt tank.
			Open the retaining clamps (1)
1	1		and remove the intermediate ring
			(2) from the tank.
	3	3.	Carefully remove the waste bag
			connection from the inlet fitting.
		4.	Close the waste bag using the
			cable binder (3).
		5.	Dispose of the dirt in accordance
			with legal regulations.
		6.	Insert a new filter bag into the
			cleaned tank as described in the
			instructions enclosed.
			IMPORTANT: Press the filter bag
			connection firmly on to the inlet
			fitting.

10 1) Option depending on model