IVB
english
4.1.3 Connecting electrical | To comply with regulations, only ap- | 1. | Ensure that the electrical |
appliances | proved dust producing tools should |
| appliance is switched off. |
| be connected. | 2. | Connect the electrical appli- |
The maximum power consumption | ance to the appliance socket | |
of the connected power tool is stat- | ||
on the control panel. | ||
ed in section 9.4 “Technical data”. | ||
|
4.2Switching on the vacuum cleaner
4.2.1 Switch position “I”
The hose diameter and the setting for the suction hose diameter must be the same.
Hose | Hose diameter |
ø | setting |
ø27 | ø27 |
ø32 | ø32 |
ø38 | ø38 |
ø50 | ø50 |
4.2.2 Switch position „auto“
The hose diameter and the setting for the suction hose diameter must be the same.
Hose | Hose diameter |
ø | setting |
ø27 | ø27 |
ø32 | ø32 |
ø38 | ø38 |
ø50 | ø50 |
4.2.3 Suction power control
| 2 | 0 |
3 | 3 | |
| 6 | |
0 |
|
|
7 |
| 0 |
2 | 5 | |
0 | 0 |
| 2 | 0 |
3 | 3 | |
| 6 | |
0 |
|
|
7 |
| 0 |
2 | 5 | |
0 | 0 |
| 2 | 0 |
3 | 3 | |
| 6 | |
0 |
|
|
7 |
| 0 |
2 | 5 | |
0 | 0 |
1. Turn the switch to position „I“.
The vacuum cleaner motor starts.
Before switching the switch to position „auto“, ensure that the tool connected to the appliance socket is switched off.
1.Turn the switch to position „auto“. The vacuum cleaner mo- tor starts when the connected appliance is switched on.
2.When the power tool is switched off the vacuum cleaner contin- ues to run for a short moment so that any dust in the suction hose is conveyed to the safety filter bag.
The motor speed and the suc- tion power can be varied with the suction power control. This allows precise adaptation of the suction power for different cleaning tasks.
4.3 Check volume flow | Before picking up dust with maxi- | |
mum room concentration values: | ||
monitor | ||
|
1.Check that all the filters are present and properly fitted.
2.When the motor is running, hold the suction hose shut. An acoustic warning sounds after approx. 1 second.
06 | 1) Option depending on model |