Nilfisk-Advance America IVB 7-M, IVB 5-M Replacing the filter bag, Emptying dirt tank IVB 3-M/5-M

Models: IVB 3-M IVB 7-M IVB 5-M

1 18
Download 18 pages 51.27 Kb
Page 13
Image 13
7.2.2 Replacing the filter bag

7.2.2 Replacing the filter bag

During the following work, ensure that dust is not unnecessarily spread around. Wear a P2 breath- ing mask.

1.Open the retaining clamps and remove the upper section of the cleaner from the dirt tank.

2.Carefully remove the filter bag connection from the inlet fitting.

3.Close the filter bag connection with the slide.

4.Dispose of the filter bag in ac- cordance with legal regulations.

5.Place a new filter bag into the cleaned tank as described in the instructions (printed on the filter bag)

IMPORTANT: Press the filter bag connection on the inlet fit- ting as far as possible.

IVB 3-M IVB 5-M IVB 7-M

english

7.2.3 Emptying dirt tank (IVB 3-M/5-M)

Only after picking up harmless dust without a filter bag.

7.2.4 Emptying the dirt tank (IVB 7-M)

1.Remove the upper section of cleaner from the dirt tank.

2.Using one hand, take hold of the dirt tank underneath and tip out the dirt.

3.Dispose of the dirt in accordance with legal regulations.

4.Clean the rim of the tank before fitting the upper section of clea-

ner.

Before reinserting the suction hose:

5. Clean

the inlet fitting and hose

collar.

 

 

2

1

1

 

3

Only after picking up harmless dust with- out a filter bag.

To empty the dirt tank after picking up liquids: remove

the intermediate ring as a proper seal is only ensured during suction. After emptying the tank: clean the rim of the tank and the seals in the intermediate ring and the upper section of cleaner before refitting them.

If the seal or groove is dirty or dam- aged, the suction performance will

4

5

 

4

5

be reduced.

Before reinserting the suction hose: clean the inlet fitting and hose collar.

1.

Remove the upper section of

2.

cleaner from the dirt tank.

Open the retaining clamps

 

(1) and remove the interme-

3.

diate ring (2) from the tank.

Pull the lever in the handle

4.

(3) upwards and tilt the tank.

Tip out the collected dirt.

5.

Dispose of the dirt in accord-

ance with legal regulations.

or:

3.Open the tank locks (4).

4.Use the handles (5) to lift the tank out of the frame.

5.Tip out the collected dirt.

6.Place the empty tank in the frame and close the locks

(4).

7.Dispose of the dirt in accord- ance with legal regulations.

1) Option depending on model

11

Page 13
Image 13
Nilfisk-Advance America manual Replacing the filter bag, Emptying dirt tank IVB 3-M/5-M, Emptying the dirt tank IVB 7-M