Nilfisk-Advance America SR 1100S B manual Use, Battery CHECK/SETTING on a NEW Machine

Models: SR 1100S B

1 100
Download 100 pages 29.32 Kb
Page 62
Image 62

ENGLISH

USER MANUAL

USE

WARNING!

On some points of the machine there are some adhesive plates indicating:

DANGER

WARNING

CAUTION

CONSULTATION

While reading this Manual, the operator must pay careful attention to the symbols shown on the plates. Do not cover these plates for any reason and immediately replace them if they are damaged.

BATTERY CHECK/SETTING ON A NEW MACHINE

NOTE

If the machine is equipped with electronic battery charger (optional), this must be connected to the batteries to allow the machine to operate.

The machine needs four 6 V batteries, connected according to the diagram (44), or one 24 V battery box. The machine can be supplied in one of the following confi gurations:

a)WET or GEL batteries already installed on the machine

b)WET batteries installed on the machine but without electrolyte

c)Without batteries

According to machine confi guration, proceed as follows.

a)WET or GEL batteries already installed on the machine

1.Open the machine hood (7) and check that the batteries are connected to the machine with the connector (46).

2.Close the hood (7).

3.Insert the ignition key (72) and turn it to "I" [without pressing the pedal (2)]. If the green warning light (75) turns on, the batteries are ready to be used.

If the yellow (74) or red (73) warning light turns on, the batteries must be charged (see the procedure in Maintenance chapter).

b)WET batteries installed on the machine but without electrolyte

1.Open the machine hood (7).

2.Remove all battery caps (45).

WARNING!

Pay attention when using sulphuric acid, as it is corrosive. If it comes in contact with skin or eyes, rinse thoroughly with water and consult a physician.

Batteries have to be filled in a well-ventilated area. Wear protective gloves.

3.Fill the battery cells with sulphuric acid for batteries (density from 1.27 to 1.29 kg at 25 °C) in accordance with the instructions shown in the Battery Manual.

The correct quantity of sulphuric acid is shown in the Battery Manual.

4.Let the batteries rest and fi ll in with sulphuric acid in accordance with the instructions shown in the Battery Manual.

5.Charge the batteries (see the procedure in Maintenance chapter).

c)Without batteries

1.Buy appropriate batteries (see the Technical Data paragraph and the diagram (44)). For the battery choice and installation, apply to qualifi ed battery Retailers.

2.Install the batteries.

3.Set the machine and the battery charger (if equipped) according to the type of batteries installed, as shown in the next paragraph.

12

146 2494 000(2)2007-02 A

SR 1100S B

Page 62
Image 62
Nilfisk-Advance America SR 1100S B manual Use, Battery CHECK/SETTING on a NEW Machine

SR 1100S B specifications

The Nilfisk-Advance America SR 1100S B is a versatile and efficient scrubber dryer that enhances cleaning operations in a variety of settings. Known for its robust design and user-friendly features, this machine is ideal for both small and large facilities, including warehouses, retail spaces, and industrial environments.

One of the main features of the SR 1100S B is its compact and ergonomic design, which allows for easy maneuverability in tight spaces. This enables cleaning staff to efficiently scrub floors without the hassle of navigating bulky equipment. With a cleaning width of 28 inches, it provides effective coverage while ensuring ease of use.

Powered by a durable battery system, the SR 1100S B allows for cord-free operation, adding to its convenience. The model is equipped with an auto-fill feature that simplifies the refilling of the solution tank, saving time in busy environments where every minute counts. The large solution and recovery tanks minimize downtime by reducing the frequency of refills and disposals during cleaning tasks.

The scrubber dryer utilizes advanced motor technology, offering powerful suction and scrubbing capabilities. Its high-performance brushes deliver superior results, effectively removing dirt and grime from different types of flooring, including tile, vinyl, and concrete. The machine also features adjustable down pressure settings, allowing operators to customize performance based on the specific cleaning needs of the surface being treated.

An intuitive control panel enhances user experience, featuring easy-to-read indicators for battery status and operational settings. The SR 1100S B is designed with safety in mind, incorporating user-friendly controls and configurations that reduce the risk of accidents during operation.

Another notable characteristic is the unit's ability to operate with eco-friendly cleaning solutions, promoting a more sustainable approach in daily cleaning tasks. This makes it an excellent choice for green cleaning initiatives, as it minimizes environmental impact while maintaining high cleaning standards.

In summary, the Nilfisk-Advance America SR 1100S B combines efficiency, convenience, and advanced technology. Its compact design, powerful performance, and ease of use make it a valuable tool for anyone seeking to achieve optimal cleanliness in various institutional and commercial settings. Whether for daily maintenance or deep cleaning efforts, this scrubber dryer stands out as a reliable solution for modern cleaning challenges.