ENGLISH
USER MANUAL
MAINTENANCE
The lifespan of the machine and its maximum operating safety are ensured by correct and regular maintenance.
The following table provides the scheduled maintenance. The intervals shown may vary according to particular working conditions, which are to be defi ned by the person in charge of the maintenance.
All scheduled or extraordinary maintenance procedures must be performed by qualifi ed personnel, or by an authorised Service Center.
This Manual describes only the easiest and most common maintenance procedures.
For other maintenance procedures shown in the Scheduled Maintenance Table, refer to the Service Manual that can be consulted at any Service Center.
WARNING!
To perform maintenance procedures, the machine must be off and, if necessary, the batteries must be disconnected.
Moreover, carefully read all the instructions in the Safety chapter before performing any maintenance procedure.
SCHEDULED MAINTENANCE TABLE
|
| Every 10 | Every 50 | Every | Every | Every | |
Procedure | Upon delivery | 100 | 200 | 400 | |||
hours | hours | ||||||
|
| hours | hours | hours | |||
|
|
|
|
WET battery fl uid level check |
|
Side and main broom height check and adjustment |
|
Dust fi lter cleaning and integrity check |
|
Skirt height and operation check |
|
Filter shaker operation check | (*) |
Main broom driving belt visual inspection | (*) |
Nut and screw tightening check | (*)(1) |
Service and parking brake check and adjustment | (*) |
Steering chain check and cleaning |
|
Main broom driving belt replacement |
|
Main motor and drive system motor carbon brush check or |
|
replacement |
|
(*)
(*)
(*)
(*)For the relevant procedure, see the Service Manual.
(1) And after the fi rst 8
16
146 2494
