HOW to Prepare the Machine for OPERA- Tion

HOW TO PREPARE THE MACHINE FOR OPERA- TION

The Scrubtec machines use six 6-volt batteries. The batteries are located in the battery compartment under the recovery tank.

To Install the batteries, follow this procedure:

1.Turn key switch off.

2.Make sure both tanks are empty.

3.Disconnect the hoses from the recovery tank (upper tank) & unplug the vac motor and ﬂoat switch.

4.Remove the tank support bracket.

5.Remove the recovery tank.

6.Place the batteries in the solution tank as shown in ﬁgures 6a and 6b.

WARNING!

Lifting batteries without help could result in an injury. Get help to lift the batteries. The batteries are heavy.

WARNING!

Working with batteries can be dangerous. Always wear eye protection and protective clothing when working near batteries. NO SMOKING!

7.Connect the battery cables between batteries and install long battery cable assembly as indicated. See ﬁgure 6a and 6b.

8.Install the tank, reconnecting hoses and plugging in vac motor and ﬂoat switch connectors. Install tank support bracket.

NOTE: Charge the batteries before using the machine.

38722B

38720B	38720B
	38722B

38720B

38722B

38722B

-16- FORM NO. 70935A

Nilﬁsk ALTO Operator's Manual - SCRUBTEC 770 / 784 / 795