Nilfisk-ALTO 30 M, 30 H operating instructions 3.3Insert the safety filter bag H

ATTIX 30/50 H/M

english

	Type of dust			Filter bag/waste bag/filter element
• Dusts	with	OEL	values	Waste bag (5 pcs.)
>0.1 mg/m3 (observe any addi-				Order No.
tional national regulations)				ATTIX 30-XM: 302000804
• Wood dusts & concrete dusts				ATTIX 50-XM: 302000728
• Dusts	with	OEL	values	Filter bag
>0.1 mg/m3 (observe any addi-				Order No.
tional national regulations)				ATTIX 30-XM: 302004000
• Wood dusts & concrete dusts				ATTIX 50-XM: 302004004
• Dusts	with	OEL	values	Filter element “M” PC:
>0.1 mg/m3 (observe any addi-				Order No.
tional national regulations)				302000490
• Wood dusts & concrete dusts				Flat filter element “M” XC:
				Order No.
				302002842

Before picking up dust with occupational exposure limit values:

1.Check that all the filters are present and properly fitted

2.The hose diameter and the setting for the suction hose diameter must be the same.

3.When the motor is running, hold the suction hose shut. For safe- ty reasons, an acoustic warning sounds if the air speed in the suction hose drops to below 20 m/s.

3.3Insert the safety filter bag "H"

A ø ø36 A

B

1.The mains plug should not yet be inserted into a socket.

2. Open	the	retain-
ing clamps (A) and re-
move	the upper	section
of the	vacuum	cleaner.

3.Insert the safety filer bag into the dirt tank.

4.Press the safety bag con- nection firmly into the inlet fitting.

5.Check that the ventilation holes (B) remain inside the dirt tank.

6.Fold the top edge of the disposal bag over the rim of the dirt tank.

10