ATTIX 30/50 H/M
english
7.2.7Replacing filter element "M" (Push & Clean System)
During the following work, ensure that dust is not unnecessarily spread around, Wear a P2 breath- ing mask.
Never use the vacuum cleaner without a filter.
A |
| ø36 | A |
ø |
|
A | ø | ø36 | A |
B |
A | ø | ø36 | A |
11.Attach the upper section of the vacuum cleaner.
12.Close the retaining clamps
(A). Ensure that the retaining clamps fit properly.
1.Switch off the vacuum cleaner and pull the mains plug out of the socket.
2.Open the retaining clamps
(A)and remove the up- per section of the vacuum cleaner.
Removing the filter element:
3.Turn the filter holder anticlo- ckwise and remove it .
4.Carefully remove the filter element.
5.Clean the filter seal (B). Check it for damage and re- place it if necessary.
Inserting the filter element:
6.Fit the filter holder and turn it clockwise to secure it.
7.Dispose of the used fil- ter element in accord- ance with legal regulations.
8.Attach the upper section of the vacuum cleaner.
9.Close the retaining clamps
(A). Ensure that the retain- ing clamps fit properly.
24