Nilfisk-ALTO 30 H, 30 M After finishing work, Switching the vacuum, cleaner off and storage

ATTIX 30/50 H/M

6 After finishing work english

6.1	Switching the vacuum		1.	After picking up hazardous
	cleaner off and storage			dust, vacuum clean the out-
				side of the cleaner.
			2.	Switch off the cleaner and
				pull the mains plug out of
				the socket.
			3.	Remove		the	suction hose
				form	the	vacuum		cleaner
				and close the inlet fitting (A)
				with the plug (B).
			4.	Wind up the power cord
				onto the handle (C). Be-
				gin winding up the cord at
				the cleaner end and not the
				plug end to prevent the pow-
	A			er cord from tangling up.
			5.	Empty the dirt tank and
				clean the vacuum cleaner.
			6.	After	picking		up	liquids:
				Store the upper section of
		B		the vacuum cleaner sepa-
				rately so that the filter ele-
				ment can dry.
			7.	Hang the suction hose with
				the floor nozzle (D) in the
				brackets and pack the ac-
	C			cessories (E) away.
		E	8.	Store the cleaner in a dry
				room where it is protected
				from unauthorized use.
		D

17