Operating instructions
3.6 Storing the lance, hose and power cord
Power cord and high pressure hose can be stored on the transport handle (2)
Store the lance in the lance holder (1)
Detergent container storage (3).
The power cord should be coiled and stored on the handle (2) . The high pressure hose should be coiled and can be hung in the same place, on top of the cord. The lance should be stored in the lance holder (1).
3.7 Transport instructions
Lifting points: Lifting handle (3) and under the cabinet, at the front (4).
The machine has a transport handle (1/3) and wheels so that it is easy to transport.
The transport handle can be raised or lowered as required. To raise or lower the handle, release the lock (2), position the handle, and secure the lock (2). Never lift the machine by the transport handle (1/3) alone! Use the lifting handle (1/3) and the bottom of the cabinet (4).
3.8 Storage - frost protection
NOTE: The machine should be stored in a
In order to prevent freezing damage to the machine, hoses and spray lance, they should always be emptied prior to storing, as follows:
1.Stop the machine, shut off the water supply and detach inlet hose and spray lance or accessory.
2.Restart the machine and squeeze the trigger.
Let the machine run until no more water comes through the spray handle.
3.Turn the machine off, detach the high pressure hose and squeeze the trigger until no more water runs out of the high pressure hose.
FROST PROTECTION. If a
9
