Safety precautions and warnings

16.Check all electric cords prior to use. Damaged cords should not be used. 17. Never let children operate your pressure washer.

18.Hold the spray lance with both hands to maintain complete control.

19.Don’t touch the nozzle while spraying, or the water stream at any time.

20.Wear eye protection while operating. The operator and others in the vicinity of the cleaning site should take action to protect themselves from being struck by dislodged debris during cleaning operations.

21.Disconnect power plug from the outlet when not in use and prior to detaching the nozzle/spray lance.

22.Only ALTO spare parts, ALTO accessories and ALTO nozzles should be used.

23.Never start the machine if ice has formed in any part of the equipment. Thaw out any ice before starting.

24.The machine is designed to use „consumer“ strength detergents, degreasers and waxes. The use of „Industrial“ solutions may affect its operation and safety. Carefully observe all detergentinstructions before using.

25.Never use the pressure washer in environments where risk of explosion is present (ie. gas vapors).

26.All electrical connections should be kept dry and off the ground.

27.Do not use the machine to clean surfaces containing asbestos.

28.If it is necessary to replace the power cord, it must be done by a ALTO service technician.

29.Faulty electrical connection of the pressure washer can cause fatalities. Never modify or alter the plug on the power cord of your pressure washer. If it doesn’t fit the outlet and adjustments are required, call a qualified electrician.

30.Some models are provided with a Ground Fault Circuit Interrupter (GFCI) built into the power cord plug. If replacement of the plug or cord is needed, use only identical replacement parts.

31.Don’t use the machine if the power cord or other important parts of the equipment are damaged

- i.e. safety devices, high pressure hoses, spray handles, cabinet.

32. The most efficient cleaning is obtained if you adjust the distance to the surface which is to be cleaned. Thus you will also avoid damaging the surface.

SAVE THESE INSTRUCTIONS

2.1 Unpacking

Once the pressure washer has been taken out of the packaging, check that it is complete and without any defects; if in doubt, the pressure washer should not be put into use and you should contact the nearest ALTO service organization.

2.2 Startup

- Check power cord

Power cord insulation must be perfect. (No cracks, cuts or other defect).

Contact a qualified electrician or a ALTO distributor if there is any doubt.

- Check voltage

Connect the pressure washer to a grounded outlet of the correct voltage (see Data Plate).

- Fuse/Breaker

Be certain that your electrical outlet is adequately fused for the machine’s requirements (see Data

Plate).

- Reset the Ground Fault Circuit Interrupter (GFCI) (if equipped)

AFTER the power cord is plugged in, press the RESET button on the GFCI.

If it will not reset, contact a ALTO service center for assistance.

- WARNING -

If these instructions aren’t followed, it may be

dangerous to use your pressure washer.

4

Page 4 Page 6
Page 5
Image 5
Nilfisk-ALTO 30CA COMPACT I owner manual Safety precautions and warnings, Unpacking, Startup
Page 4 Page 6

30CA COMPACT I specifications

The Nilfisk-ALTO 30CA COMPACT I is a powerful yet compact cleaning solution ideal for a wide range of applications. Renowned for its robust design and user-friendly features, this machine is perfect for both professional and industrial use, making it an essential addition to any cleaning fleet.

One of the standout features of the 30CA COMPACT I is its compact size, which allows for easy maneuverability and storage without sacrificing performance. This machine is designed to reach tight spaces that larger machines simply cannot access. Its lightweight construction also makes it easy to transport, facilitating ease of use in various locations.

Equipped with advanced motor technology, the 30CA COMPACT I delivers exceptional suction power and cleaning efficiency. The high-performance vacuum motor ensures effective dust and dirt removal, providing operators with impressive results in a short amount of time. This powerful system is matched with a robust filtration setup, which helps to maintain air quality by capturing fine dust particles and allergens, making it a great choice for environments that require high cleanliness standards.

The Nilfisk-ALTO 30CA COMPACT I features an ergonomic design that enhances user comfort and reduces fatigue during extended cleaning sessions. The handle is adjustable, allowing users to set it to their preferred height and grip, promoting better posture and efficiency while working. The large wheels ensure smooth movement across various surfaces, eliminating the strain often associated with heavy cleaning tasks.

Another key characteristic of this model is its versatility. The Nilfisk-ALTO 30CA COMPACT I can be equipped with a variety of attachments and accessories, allowing it to tackle different cleaning challenges effectively. Whether it's cleaning carpets, hard floors, or upholstery, the machine adapts to the task at hand, delivering excellent results in every situation.

Furthermore, the machine is built for durability and longevity, featuring high-quality materials that withstand the rigors of daily use. The design also incorporates easy access to components for maintenance and repairs, minimizing downtime and extending the overall lifespan of the equipment.

In summary, the Nilfisk-ALTO 30CA COMPACT I combines compactness and performance, making it an ideal choice for those looking for an efficient cleaning solution without the bulk. Its powerful motor, adjustable ergonomics, versatility with attachments, and durability make this machine stand out in the competitive field of cleaning equipment. Whether used in commercial spaces, offices, or homes, the 30CA COMPACT I is designed to meet diverse cleaning needs effectively.
Top Page Image Contents