Nilfisk-ALTO MX 521 H manual Inspection, Cleaning Solutions, Maintenance

INSPECTION:

Carefully unpack and inspect your MX 521 H for shipping damage. Each machine is tested and inspected before shipping. Any shipping damage incurred is the responsibility of the carrier. You should notify the carrier immediately if you notice damage to the box or to the machine or parts.

CLEANING SOLUTIONS:

We recommend liquid cleaning chemicals. Powder chemicals may be used, but unless mixed very thoroughly they could cause a build-up in the pump, lines, heat exchanger and/or quick disconnects. Any problem caused by a chemical build-up is not covered by warranty. Use a neutral cleaner with a pH between 6 and 9 to avoid premature wear of the pump, seals, and/or other components. Damage caused by the use of strong chemicals is not covered by the warranty.

MAINTENANCE:

For optimum performance flush the machine with clear water at the end of each working day. Once a month, minimum, run a flushing compound through the machine to break up any mineral or chemical build-up that may have formed. Lubricate the wheels, castors, and quick disconnects with an all purpose silicone spray. The vacuum and the pump do not require any maintenance. Clean the body with an all purpose detergent, and protect it with an automobile interior polish.

Record the serial number and model of your new extractor here:

Serial Number: __________________

Model: MX 521 H__

Purchase Date:________________

Write the name and phone number of your distributor:

_____________________________________

_____________________________________
(and be sure to register your warranty)
RED LIGHT	1	2 VACUUM
INDICATES		ON/OFF SWITCH
THE HEATER
IS HEATING

3SELECT CARPET OR UPHOLSTERY

4

5	I	I
SWITCH	I
TURNS THE
HEATER ON
	O	O

O

PUMP

ON/OFF SWITCH