ENGLISH
USER MANUAL
Stopping the machine
1.To stop the machine, release the pedal (69).
To stop the machine quickly, also press the service brake pedal (75).
In case of emergency, press the emergency
2.Turn the ignition key (67) to “0” and remove it.
3.Engage the parking brake by pressing the pedal (75), then engage the brake lock control lever (68).
MACHINE OPERATION
73
67
25
51 
56 57 58
70
75 
68 
71
4
P100247
1.Avoid stopping for a long time with the machine in the same position and the brooms turning: this could create unwanted marks on the floor.
2.To collect light and bulky waste materials, lift the front skirt by pressing the pedal (74); take into consideration that the machine vacuum capability is reduced when the front skirt is lifted.
WARNING!
When operating on wet floors, it is essential to turn off the vacuum system by pressing the switch (56) to prevent the dust filter from being damaged.
3.For machine proper operation, the dust filter must be as clean as possible. To clean the dust filter while sweeping, turn on the filter shaker for a short interval by pressing the upper part of the switch (56), then turn on the vacuum system by pressing the lower part of the switch (56).
While working, repeat the procedure every 10 minutes on average (depending on the dustiness of the area to be cleaned).
NOTE
This procedure can also be performed when the machine is moving.
CAUTION!
When the dust filter is clogged and/or the hopper is full, the machine cannot collect dust and debris anymore.
4.The hopper (4) should be dumped after each working period and whenever it is full (see the procedure in the next paragraph).
16
