
FIRST TIME INSTALLATION
General information
Once your Mediamaster has been correctly connected, a “First time installation” must be performed.
During this procedure, helpful information is displayed at the bottom of the menus. NOTE: The select button always confirms a selection in these menus; therefore, pressing it will take you to the next step in the installation process. However, more than one value often has to be entered in a menu.To do this, complete all the nec-
essary settings on their individual lines, then confirm them simultaneously by pressing select.
You can always return to the previous menu by pressing back.
Use cursor up /down to move upwards and downwards, from one line to another. Use cursor left/right to change settings.
You can also use the number buttons on the remote control to enter numeric val- ues.
Switching on for the first time and starting the “First time installation”
•Plug in your Mediamaster
•The ”First time installation” menu is shown.
•Press select to continue.
Language
•Select the desired menu language with cursor up /down . This will also be the default language for audio and subtitling.
•Press select again to confirm your language choice and to start searching for TV/radio channels.
GB 15