Nokia 150T The cursor button

REMOTE CONTROL

This section describes how to operate the Mediamaster using the buttons on the remote control. Some of the functions can also be performed by using the buttons on the front panel.

	Press once to turn the sound off/on (mute).
	Press and hold for a few seconds to switch the Mediamaster in and out
	of standby mode.
0 - 9	Change channels and enter values in menus. Note: If 0 is entered as the
	first digit in viewing mode, the TV Release functionality is activated (see
	below).
0	TV Release. To switch between digital TV/Radio, analogue TV, satellite TV
	and VCR.
info	To display short and extended information (if transmitted) about current
	and next programmes. Brings up the viewing banner in viewing mode.
back	Go back one level at a time within menus without storing any settings.
	To toggle between the present and previous TV/Radio channels in view-
	ing mode.
	Close the Navi Bars.
select	Confirm choices and selection of a highlighted item.
	Open the Navi Bars.
opt	Select service options in viewing mode.
txt	Press to enter teletext (if available).

The cursor button

Cursor up

Move up in the menus and change to the next channel in viewing mode.

Cursor left

Move left/change settings in menus. Decrease the volume level in viewing mode.

Cursor down Move down in the menus and change to the previous channel in viewing mode.

Cursor right Move right/change settings in menus.

Increase the volume level in viewing mode.

GB 9